If you have a 2017 Jeep Wrangler, it doesn’t hurt if you know how to reset oil life on Jeep Wrangler 2017. Be advised, though, that there are different ways and methods to reset the oil life indicator, depending on the model year. It would be even cooler if you know how to perform the reset on different model years, even if they aren’t yours. By knowing the importance of oil life indicator reset and how to do it properly, you can gain thorough knowledge about caring and protecting your vehicle.
About Jeep Wrangler
Before you learn about how to reset oil life on Jeep Wrangler 2017, it doesn’t hurt if you learn about the basic facts about the car and the company. Jeep, the American carmaker, produced the offroad ride since 1987. They did it to replace their CJ. Since then, they have made 4 different variants: TJ, YJ, JL, and JK. The company introduced the third gen Wrangler in 2007, known as the JK which was running on 2.8 diesel and 3.8 petrol powertrains. Then, the 2018 witnessed the launch of their fourth gen models.
The Importance of Oil Change and Oil Life Reset
In order for your engine to run well and smoothly, you need oil to lubricate it. And to make sure that the engine can last long, you want to schedule the oil change. That’s why you need the oil life indicator life; to notify you that your oil condition is deteriorating. When the indicator light is on, it means that you need to change the oil immediately.
After the oil change takes place, you (or the technician) should reset the indicator system. It’s done so that the indicator light can function properly. You see, your indicator should be returned to the 100% condition because the oil is still fresh and new. As time goes by, the oil condition wouldn’t be 100% fresh anymore because of the constant drive, the distance of your ride, and many things. The percentage would decline slowly, showing you the condition of the oil.
Imagine what would happen if the indicator light isn’t reset after the oil change. You won’t get the ‘real time’ condition of the oil; which may lead to errors and mistakes in the maintenance and care. You may be compelled to change the oil sooner than you should have, which may affect your spending.
Different Resetting Methods
Do you know that different model years would lead to different oil change methods? Although the majority of them would share several similarities, they also have some significant differences. That’s why knowing your model year will help in doing the procedures properly.
The Third Gen JK
With model years between 2008 and 2017, you should know that the easiest way on how to reset oil life on Jeep Wrangler 2017 is by the gas pedal press.
- Turn your ignition to the position ‘Run’. Don’t start out your engine. What if your car comes with keyless system, press the button ‘Stop/Start’ twice and don’t press the brake pedal
- Now, depress your gas pedal completely. Do it 3 times in the limit of 10 seconds. No need to rush it. Just ensure that you fully press it. if you do it right, the system has reset.
- Turn your ignition off. Press the button ‘Stop/Start’ only once
- Now you can start the engine so you can verify that the indicator light has been reset
The Fourth Gen JL
These model years was made from 2018 to 2021. This model year has been considered the newer model. Starting from 2018 and above, the Jeep owners can perform the reset either through EVIC control buttons (the instrument cluster) or the gas pedal. This method is different from how to reset oil life on Jeep Wrangler 2017.
If you are using the gas pedal method, you can try the method that has been previously explained before. This method is similar to the one for 2017 model.
However, if you use the cluster method, you can try these steps:
- Press the button ‘Stop/Start’ twice. Do it without going down the brake pedal. Your car should be in the position ‘Run’ without starting the engine
- Access the navigation button and find the section ‘Vehicle Info’
- Scroll and find ‘Oil Life’ by using the available navigation button
- Press the OK button and hold it off for several seconds to perform oil life reset
If you want to check the complete procedures, you can actually check your manual. When you purchase a variant of a Jeep, you will get an owner’s manual that keeps all the complete information about the vehicle itself. If you want to know about how to reset oil life on Jeep Wrangler 2017, you should check the manual.
The Things to Know when Resetting the Oil Life Indicator
Don’t underestimate the importance of choosing the right oil. If you don’t really know which oil to choose, you should consult the professional. You can take your car to the official dealership and ask around. Or you can have them change the oil while learning about the whole deals in details. You can learn about the right oil, when to perform the change, how to do it, how to reset the indicator light, and many more. Some cars may use full synthetic type, while others may use another different type of oil.
Make sure that you choose the legit garage or official dealership. The cost may range between $150 and $500, which depends on how much work is needed. The true service wouldn’t hesitate to give you a price range estimation at the beginning, so you have the idea of how much you should prepare. Avoid those shady garages who wouldn’t give any estimate.
Final Words
Scheduling a regular maintenance would be better than having to change the oil (and reset the indicator light) once in while, especially in emergency. Some people may wait until their indicator shows 10% or even 5% before they decide to change the oil. It may harm your engine than doing any good. In the end, the general knowledge about how to reset oil life on Jeep Wrangler 2017 can be quite good for you, especially when it comes to caring for your car.
Gallery of How to Reset Oil Life on Jeep Wrangler 2017: Knowing the Different Methods
