It’s crucial to know how to reset oil life on Jeep Wrangler 2016 because it helps you understand your vehicle better, so you know how to care and maintain your car properly. Caring for your vehicle can prolong its life cycle, ensuring its quality and performance for good.
The Important Role of Oil Life Indicator
As one of those Jeep Wrangler owners, you should know that oil life indicator plays a crucial part of the care and maintenance. The indicator would inform you about the oil quality and the regularity of the change. Basically, the indicator would tell you how often you should properly change the oil. Unfortunately, changing the oil won’t deal with the entire problem. Knowing how to reset oil life on Jeep Wrangler 2016 will also help you do everything correctly. It would be even better if you can learn how to do it by yourself.
2016 Model Year Reset
Keep in mind that oil life indicator comes in a package with the oil change. It means that when you change the oil, you also need to reset the indicator. So, how to reset oil life on Jeep Wrangler 2016?
- Turn the car’s ignition to position ‘On or Run’ but don’t start the engine on. You only need to turn the ignition just one position before completely starting it on
- Check the display screen. Navigate and find the option ‘Vehicle Info’
- Once you have found it, find ‘Oil Life’
- Press (and then hold) the OK button for a while. You should see the gauge resets itself back to 100%
As you can see, the entire process is quite simple and straightforward. However, if you fail to do it correctly, the oil life system would ask you to even change the oil more often than it actually needs. So, make sure that you do it properly, and make sure that you don’t skip doing the oil change regularly.
Different Methods on Different Year Models
Be advised that different method (or way) may be different from one model to another. But in general, this method is quite similar to those various models. The technique is not complicated or hard, so you shouldn’t be confused or have any issue following the steps.
Oil Life Reset for Wrangler YJ
Wrangler YJ is the model year between 1986 and 1995 so it’s pretty old-school. The steps are:
- Make sure that the ignition position is in On, but you shouldn’t press the gas pedal
- Now, it’s time to press the pedal, but do it slowly. Then do it twice more. This cycle should be completed within 10 seconds
- Now, you need to push that button ‘Stop/Start’ but don’t press the foot pedal. When doing this, the ignition should be off
- Check the oil life indicator. It should be reset to 100%
Oil Life Reset for Wrangler JK
All Jeep Wranglers need oil life indicator reset after the oil change. But as it was mentioned before, the process may be different. The JK variant is the model year from 2007 to 2017. This is the part of how to reset oil life on Jeep Wrangler 2016 that you can do on your own
- The Jeep should be within Park mode. This is for the sake of your own safety
- Turn the (ignition) switch up to 2 notches. This should stop right before the ‘Start the engine’ position. If you can do it correctly, you should hear somewhat ringing noise
- Wait until the chime go off. Once you don’t hear anything, press the gas pedal. Do it 3 times
- Rotate the ignition to off. This action should reset the indicator gauge
- You can test it out by turning on the engine. By now, you shouldn’t see the indicator light being on. It means that your light has been reset back to 100%
Oil Life Reset for Wrangler JL
The JL model year is the newest type, launched the first time in 2017 and lasts until today.
- Rotate your ignition to the position ‘On’. Don’t start the engine. If you have the ‘Stop/Start’ button, press it twice. Again, you aren’t supposed to activate the engine. If you do it correctly, the lights within your dash should be on
- Scroll down the control panel. Find the ‘Vehicle Info’. Afterwards, press the button ‘Over’
- You will be given tons of options. You should scroll those options through by using the down arrow. Find the option ‘Oil Life’
- You should be able to see a statement ‘Hold on OK to reset’. Follow what it says. Press that OK button and hold it off until you see the status becomes 100%.
- You’re done. You have reset the indicator gauge.
Resetting the Indicator: Helpful Tips
Resetting the oil life is pretty direct and straightforward, so there aren’t many handy tips available. However, there are several things that you can do so the procedures can go smoothly and efficiently.
- Always check the manual if the general method doesn’t seem to work for you. Each model year has its own method and way (and you always get the manual), so consult it
- Switch your odometer so you can see the total driven mileage. BY doing this, you can see by yourself whether the oil change has been successful or not
- Apply the parking brake (ALWAYS!) before doing any oil change or the life reset procedure. This is a crucial safety procedure that is done for your own sake
Final Words
Jeep Wrangler is one vehicle type that is packed with all the crucial technologies and advanced features to help you not only enjoy your drive, but also to help you care for your ride. All of the handy features are designed to assist you ensure that it would stay on the top form. Some features are made easy, but it doesn’t you should underestimate them or think that they are unimportant. If you are clueless about where to start, your manual can be an ideal starting spot. So, if you want to know how to reset oil life on Jeep Wrangler 2016, check it first so you can get the basic ideas of what to do.
Gallery of How to Reset Oil Life on Jeep Wrangler 2016 and Other Model Years
